Topplate PC/104 Adapter Assembly¶
| # | Part number | Qty | Assembly Torque [N.m] |
|---|---|---|---|
| 1 | F-CH-M-1.6-12-A4 | 6 | 0.16 |
| 2 | S-PANEL-BO-10 | 1 | - |
| 3 | S-BLOCK-AT-10 | 1 | - |
| 4 | S-BLOCK-BT-10 | 1 | - |
| 5 | S-BLOCK-CT-10 | 1 | - |
| 6 | S-BLOCK-DT-10 | 1 | - |
Step description¶
Warning
Do not apply the assembly torque to the blocks until at least one stack component (PC.104 module) is mounted onto the blocks.
-
Secure the top stack blocks to the PC/104 stand-offs using appropriate M3 fasteners and torque selection. Ensure the blocks are mounted straight so that they align with the through-holes in the top plate.
-
Attach the top stack blocks (
#3,#4,#5) to the top-plate (#2) using the M1.6 x 14 mm fasteners provided (#1). -
The use of the PC/104 adapters is optional. The location and number of stack adapter sets used is up to the customer's configuration.